检查井模具|检查井模具在使用中需要注意的要素
河北保定建材模具机械厂，——TEL：（微信同步） ，
检查井模具使用过程中注意事项：
1 .放置预制件的场地必须平整。
2 .预制之前模具内须擦脱模剂或脱模油。
3 .检查井模具装有混凝土的模具必须放平整。
4 .禁止在4度以下预制构件。
5 .脱模后暂时不用的模具必须在清理后摆放整齐.防止变形.。
6 .脱模时使用的敲击工具必须是木锤或皮锤.。
7 .脱模时要用脱模器或下面垫麻袋片或垫稻草袋或废轮胎,检查井模具以防损坏预制件和模具。
8 .震动平台上要经常清理,保持平整,收工时清理干净。
Matters needing attention during the use of check well die:
1. the site for prefabricating must be smooth.
2. before the prefabrication, the mold release agent ordemoulding oil must be removed.
3. mould for inspection well and concrete must be leveled.
4. the prefabricated component is prohibited below 4degrees.
5. molds that are not used for a while after being released mustbe laid out after cleaning up, so as to prevent deformation.
6., percussion tools must be wooden hammers or leather hammerswhen stripping.
7., when releasing the mold, we need to use a releasable deviceor a bottom sack or a rice straw bag or a waste tire, and check thewell mold to prevent damage to the prefabricated parts andmoulds.
8. vibration platform should always clean, neat, clean uptime.
检查井模具|检查井模具在使用中需要注意的要素
河北保定建材模具机械厂，——TEL：（微信同步） ，
