防浪护岸模具基本说明 防浪块模具产品结构防浪石的结构呈现的主要是内部空心或者多角形，扭王字块模具这样能够保证在海浪涨潮的时候，可以应对海水的冲击力。在使用防浪石钢模具的时候，要注意拆模的问题，按照形状的不同，设计的模具拆模方式也不同，有的四周可以打开，有的则只能打开两侧的侧板，防浪石预制块上面打吊装孔，扭王字块模具使用叉车或者行车吊起来，这种拆模方式主要是应对的大型的防浪石预制块。
The structure of the wave-breaking stone is mainly hollow orpolygonal inside. The twisting of the king block mold can ensurethat it can cope with the impact of the sea when the waves arehigh.When using anti-wave stone steel molds, pay attention to theproblem of mold removal. According to different shapes, thedesigned mold removal methods are different. Some can be openedaround, and some can only open the side panels on both sides. Ahoisting hole is punched on the prefabricated block of Langshi, andthe mold of the Twisting King block is lifted by a forklift or acrane. This method of dismantling is mainly used to deal with thelarge precast block of anti-wave.
通过将水泥或者是混泥土浇灌进模具中，然后细细的搅拌，让原理在模具内部分布均匀就可以使用振动棒进行震动，因为扭王字块护岸模具的体积庞大不方便放到振动平台进行振动。使用功率强的振动棒很为合适，既可以将模具里面的气泡排出去也可以让原料表面很为平整，方便扭王字块的安放。扭王字块被放置在防浪堤的外面，在海浪来临的时候，经过一层又一层密密麻麻的扭王字块时，海浪的速度就会慢下来，他被扭王字块增加了阻力，呼啸而来时裹挟着的巨大力也被消减了很多。
By pouring cement or concrete into the mold, and then mixing itcarefully, the principle can be evenly distributed inside the moldto use the vibrating rod to vibrate, because the bulk of thetwisted king block revetment mold is not convenient to place on thevibrating platform. vibration.It is suitable to use a vibrating rodwith strong power, which can expel the bubbles in the mold, andalso make the surface of the raw material very smooth, which isconvenient for the placement of the twisting block.The Twisted Kingblock is placed outside the breakwater. When the wave comes, thespeed of the Twisted King block will slow down when the wave comes,and the twisted King block increases the resistance. , The hugeforce entrapped when howling came was also reduced a lot.