动力源DKD50通信电源监控模块 嵌入式电源监控模块现货供应

配件产品详情

DKD50 动力源通信电源整流模块 动力源DKD50 DKD48 DKD42 DKD46

● 交流输入适应能力强，适用我国不同地区使用，输入频率范围45～66Hz。 整流模块工作环境

温度宽，可在-40℃～70℃温度范围内工作

● 机柜采用落到式安装，简单、灵活，三种外形尺寸符合不同用户的需求

● 通信电源模块工作指示灯状态指示，维护人员能时间获得状态信息，符合中高端用户的需求。

智能网络化设计，提供RS485/RS232等多种通信接口和干接点告警接口，可实现远程集中监控，无人值

守

● 整流模块采用先进的软开关技术，体积小、重量轻、功率密度高

● 全数字化交错PFC创新控制的有限双极性控制ZVS全桥拓扑、倍整流拓扑、双单片机实现全数字监控

● 系统整流器采用功率因数校正技术，使输入的交流电流波形与输入的交流电压 波形相同，相位一

致，

整机效率高，节省能源，降低运营成本

● 系统整流器采用高频PWM控制变换技术，一方面减少了开关器件在高频开关过程中的功率损耗，提高

了整机效率；另一方面减少了电磁干扰，电源系统安装在程控机房内

● 系统采用民主均流技术，提高了系统工作的稳定与可靠性，减少了设备日常的工作维护

● 系统可对电池进行智能化的管理，有关电池的均充电压、浮充电压、充电限流值等参数可根据系统

配置的电池性能通过控制器或遥控系统进行连续设置，可对电池进行浮充、均充及电池试验

● 系统结构融入了等电位设计理念，简单巧妙的达到机柜通体等电位的设计要求，也提高了电磁

兼容性能和系统防雷能力

● 绿色环保。采用优良的滤波及屏蔽工艺，具有超低的电磁辐射；可在较宽的负载范围内，功率因数

高达0.998，输入谐波电流分量位于3%以下；冷却风扇依据负载大小自动调速，音响噪音小于55dB

● 网络配置合理，组网灵活，可满足用户特殊定制的要求

DUMC-48/15H（20H） 智能高频开关通信电源系统（嵌入式）

适用领域

固网通信、移动通信、电力、公安、铁路、水利、交通、石油、银行等需要小功率直流电源的场所，尤

其适用于移动通信

室内分布基站或接入网设备供电。

系统容量

DUMC-48/15H1 15A～30A 整流器1～2台

DUMC-48/20H1 20A～40A 整流器1～2台

DUMC-48/15H2 15A～45A 整流器1～3台

DUMC-48/20H2 20A～60A 整流器1～3台

技术参数

1.交流配电

交流输入 单相220V/32A/2P断路器，1路

2.直流配电（DUMC-48/15H1（20H1））

电池 熔断器20A，1个

输出分路 20A×1，10A×1 熔断器

直流配电（DUMC-48/15H2（20H2））

电池 断路器50A，1个

输出分路 25A×2，10A×2，6A×1 断路器

3.整流器DZY-48/15H（20H）

交流输入电压 单相90V～300V

交流输入频率 50Hz±10%

直流输出电压/电流 48V/15A（20A）

效率 ≥90％

4.系统参数

稳压工作范围 -43V～-58V

稳压精度 ≤±0.6%

均流误差 ≤±3%

5.控制器DKD37（DKD39）

工作电压 直流39V～60V

主要功能 系统检测、参数设置、电池维护、

故障记录、三遥功能、汉字液晶显示（DKD39）

机械参数（外形尺寸：宽×深×高 单位：mm 重量）

DUMC-48/15H1(20H1) 442×280×43.6 6.5Kg

DUMC-48/15H2(20H2) 442×280×87.2 13Kg

DZY-48/15H(20H) 126×208×41.6 1.7Kg

DKD37 66.5×208×40.5 0.9Kg

DKD39 126×208×40.5 1.2Kg

DKD50 Power Source Communication Power Supply Rectifier ModulePower Source DKD50 DKD48

DKD42 DKD46

The AC input has strong adaptability and can be used indifferent areas of China. The

input frequency ranges from 45 Hz to 66 Hz. Rectifier moduleworking environment

Wide temperature range. It can work in the temperature range of- 40 ~70.

The cabinet adopts drop-down installation, which is simple andflexible. The three

dimensions of the cabinet conform to the needs of differentusers.

The working indicator of communication power supply moduleindicates the status of the

lamp. Maintenance personnel can obtain the status information atthe first time, which

meets the needs of middle and high-end users.

Intelligent network design provides RS485/RS232 and othercommunication interfaces and

trunk contact alarm interfaces, which can realize remotecentralized monitoring and

unattended.

The rectifier module adopts advanced soft-switching technologywith small volume, light

weight and high power density.

Limited bipolarity control ZVS full bridge topology, doublerectifier topology and double

single chip microcomputer for full digital monitoring

The system rectifier adopts power factor correction technologyto make the input AC current

waveform the same as the input AC voltage waveform and the samephase.

The whole machine has high efficiency, saves energy and reducesoperation cost.

The system rectifier adopts high frequency PWM controlconversion technology, on the one

hand, it reduces the power loss of switching devices in theprocess of high frequency

switching, and improves the power consumption of switchingdevices in the process of high

frequency switching.

On the other hand, it reduces electromagnetic interference, andthe power supply system is

installed in the program-controlled computer room.

The system adopts democratic current sharing technology, whichimproves the stability and

reliability of the system and reduces the daily maintenance ofequipment.

The system can manage batteries intelligently. The parameterssuch as average charging

voltage, floating charging voltage and charging current limitcan be based on the system.

The performance of the battery can be continuously set up by thecontroller or remote

control system. Floating charge, equalizing charge and batterytest can be carried out on

the battery.

The system structure incorporates the concept of equipotentialdesign, which is simple and

ingenious to meet the design requirements of equipotentialcabinet, and also improves the

electromagnetism.

Compatibility Performance and System Lightning ProtectionCapability

Green environmental protection. With excellent filtering andshielding technology, it has

ultra-low electromagnetic radiation, and can achieve powerfactor in a wide load range.

As high as 0.998, the input harmonic current component is below3%. The cooling fan adjusts

its speed automatically according to the load size, and thesound noise is less than 55

dB.

Reasonable network configuration and flexible networking canmeet the special

customization requirements of users

DuMC-48/15H(20H) Intelligent High Frequency SwitchingCommunication Power Supply System

(Embedded)

Areas of application

Fixed-line communications, mobile communications, power, publicsecurity, railways, water

conservancy, transportation, petroleum, banking and other placesrequiring low-power DC

power supply, especially for mobile communications

Indoor distribution base station or access network equipmentpower supply.

system capacity

1-2 DUMC-48/15H1 15A-30A Rectifiers

1-2 DUMC-48/20H1 20A-40A Rectifiers

1-3 DUMC-48/15H2 15A-45A Rectifiers

1-3 DUMC-48/20H220A-60A Rectifiers

technical parameter

1. AC Distribution

AC input single-phase 220V/32A/2P circuit breaker, 1 circuit

2. DC Distribution (DUMC-48/15H1 (20H1))

Battery Fuse 20A, 1

Output shunt 20A*1,10A*1 fuse

DC Distribution (DUMC-48/15H2 (20H2))

Battery Circuit Breaker 50A, 1

Output Divider 25A*2,10A*2,6A*1 Circuit Breaker

3. Rectifier DZY-48/15H(20H)

AC Input Voltage Single Phase 90V~300V

AC input frequency is 50 Hz + 10%.

DC output voltage/current 48V/15A(20A)

Efficiency (>90%)

4. System parameters

Voltage stabilization range - 43V to - 58V

Voltage stabilization accuracy < 0.6%

Current sharing error < 3%

5. Controller DKD37 (DKD39)

Working Voltage DC 39V~60V

Main function system testing, parameter setting, batterymaintenance,

Fault Recording, Three Remote Functions, Chinese LCD Display(DKD39)

Mechanical parameters (shape size: width * depth * height unit:mm weight)

DUMC-48/15H1 (20H1) 442*280*43.6.5 Kg

DUMC-48/15H2(20H2)442*280*87.2 13Kg

DZY-48/15H(20H) 126*208*41.61.7Kg

DKD37 66.5*208*40.50.9 Kg

DKD39 126*208*40.51.2Kg