随着风力发电行业的发展,风电基础模具的市场需求越来越大。
1.制作模板前,需要充分考虑风电基础的设计要求,确定模板尺寸、厚度和设计形状。
2.制作钢模板时,必须严格按照设计尺寸制作,避免不必要的浪费和误差。
When making steel templates, it is necessary to strictly followthe design dimensions to avoid unnecessary waste and errors.
3.制作木模板时,一定要保证木板平整,不得有明显的翘曲和变形。
4.混凝土浇筑前,需要使用防粘涂剂处理模板表面,以防混凝土黏附在模板表面。
Before pouring concrete, it is necessary to use anti adhesivecoating to treat the surface of the formwork to prevent concretefrom adhering to the surface.
5.混凝土浇筑后需要等待适当的时间,待混凝土干燥后再拆除模板,避免对混凝土造成损害。