卧式管廊模具是用于制造地下管道、通道、隧道等的模具。在制造管廊时，需要设置合适的孔洞以便于安装管道和设备，并保证管廊的质量和稳定性。卧式管廊模具的制造材料通常是高强度钢板和合金铸钢，耐磨性和耐用性都很好。施工时通常是先将模具水平放在地面上，然后在模具内浇筑混凝土，待混凝土固化后，再进行模具的拆除。模具是以实际所需要的图纸尺寸进行加工的，采用的板材厚度需要维持模具周转2年以上，在使用完成后如果不进行保养的话就会很影响使用的寿命，因为是需要进行长时间重复使用的，所以就需要注意进行保养。保持模具的清洁和防锈是延长其使用寿命的关键。此外，及时更换磨损的模具零件，定期检查模具的紧固件等也是保证生产质量的关键步骤。Duringconstruction, the mold is usually placed horizontally on the groundfirst, and then concrete is poured inside the mold. After theconcrete solidifies, the mold is removed. The mold is processedaccording to the actual required drawing dimensions, and thethickness of the plate used needs to maintain the mold turnover formore than 2 years. If maintenance is not carried out after use, itwill greatly affect the service life, as it needs to be reused fora long time. Therefore, attention should be paid to maintenance.Maintaining the cleanliness and rust prevention of molds is the keyto extending their service life. In addition, timely replacement ofworn mold parts and regular inspection of mold fasteners are alsokey steps to ensure production
