四角锥防浪石模具的外形较为独特,从整体来说四脚锥模具是由是三个大小形状相同模块组成,模块衔接部位焊接筋板,用来固定面板和安装螺栓,模具的锥形结构,没有锥尖,均为圆弧顶,锥体均采用整块钢板通过折弯,切割、打磨、等多项工序焊接而成,模具的外侧焊接有圆弧状筋板,以抵御混凝土重量产生的压力,该模具采用预制法生产加工预制件,利用一角的顶部上料口进行灌注混凝土,因模具的特殊结构,灌注混凝土可分次注入,使每一层的混凝土振捣到位再进行下一层灌注,完成后将模具口抹平,等待干燥脱模就可投入使用了。在加工过程之中需要注意的是,模具不能直接接触泥浆,因为长时间接触湿泥浆会加速模具的老化。在使用模具后,还是要对模具进行简单的清理,防止泥浆粘连到模具表面,否则再次使用时,制作出来的预制件的外观就不会那么的标准,同时在存放模具前,还需在模具的表面上涂抹一层防锈剂,这是因为生锈后的模具钢板会变薄变脆,影响模具的使用年限。Afterusing the mold, it is necessary to simply clean the mold to preventthe mud from sticking to the surface of the mold, otherwise when itis used again, the appearance of the prefabricated parts will notbe so standard, and at the same time, before storing the mold, itis also necessary to apply a layer of rust inhibitor on the surfaceof the mold, because the mold steel plate after rusting will becomethinner and brittle, which will affect the service life of themold.