三角锥消浪石模具的结构比较简单,一般都是呈现棱锥的模式,同现在长江水域使用的透水三棱锥预制块有些类似。其生产原理主要是结合对不同环境、不同样式呈现的主体为三棱型或者正方体的样式,以有效的阻挡海浪的冲击力,保证岸边工程的安全性。采用的是钢板的材质进行模具的制作,选用的是Q235材质的钢板,钢板的厚度有几种不同的选择,在2--5.75毫米之间进行选择,由于阻浪石模具的体积较大,所以选用的钢板的厚度为3.75毫米,外侧还会搭配筋板进行使用,筋板的尺寸在4*50--8*100毫米之间,选用的是6*80毫米的尺寸进行制作,具体的尺寸还是要根据客户的需求进行定制。模具施工的速度非常的快,加工出来的消浪石的耐用性相对来说透水性会好很多,模具施工完以后注意做好清洁,然后再在干净的库房中进行搁置,否则会对本身的应用次数造成一定的影响,模具施工完以后放置的仓库需要保持干燥,不要出现模具破损的状况,以免模具的使用次数缩短。
The speed of mold constructionis very fast, the durability of the processed wave-dissipatingstone will be much better in terms of water permeability, payattention to cleaning after the mold construction, and then put itaside in a clean warehouse, otherwise it will have a certain impacton the number of applications itself, and the warehouse placedafter the mold construction needs to be kept dry, and the moldshould not be damaged, so as not to shorten the number of molduses.